Simulated Rubber Equipment

1. Performance requirements

1.1 Product Structure. Made of TPR material and molded twice.

★ 1.2 Product dimensions. The blade length is 280mm (maximum deviation ± 2mm), the blade face width is 90mm (maximum deviation ± 2mm), the handle diameter is 35mm (maximum deviation ± 2mm), and the weight is 250g (maximum deviation ± 5g).

1.3 Product parameters. The handle and surface of the knife are made of high-strength hard TPR material with good impact resistance, and the handle has anti slip patterns; The blade is made of tough and aging resistant soft TPR material.

★ 1.4 Technical indicators. The handle has a Shore hardness of 60-65 °, the blade has a Shore hardness of 60-65 °, and the blade has a Shore hardness of 20-25 °.

2. Environmental adaptability requirements: It can be used normally in an environment of -30 ℃ to+50 ℃.

3. Reliability requirements: The product is highly simulated, the material is environmentally friendly, the blade is moderately soft and hard, can bend, and can directly strike the human body without causing harm.

4. Quality requirements: The surface should be free of burrs, smooth and flat, without gaps, clean, and free of defects such as protrusions, indentations, burrs, and cracks. The blade is black (color card number: PANTONEBlack3U), and the blade is pure white.

1. Technical indicators

1.1 Raw materials: The axe head is made of rubber material, and the handle is made of natural wood material.

★ 1.2 Size standard: Specification 410mm ± 10mm x 118mm ± 1mm.

★ 1.3 Weight: 320g ± 20g (including wooden handle).

1. Performance requirements

1.1 Product Structure. Made of TPR material and molded twice.

★ 1.2 Product dimensions. The dagger is 215mm long (with a maximum deviation of ± 2mm) and 45mm wide (with a maximum deviation of ± 2mm); The dagger blade is 124mm long (with a maximum deviation of ± 2mm), 25mm wide (with a maximum deviation of ± 2mm), and 9mm thick (with a maximum deviation of ± 1mm); The handle of the dagger is 85mm long (maximum deviation ± 2mm), 30mm wide (maximum deviation ± 2mm), and 25mm thick (maximum deviation ± 1mm); The sheath of the dagger is 145mm long (with a maximum deviation of ± 2mm) and 37mm wide (with a maximum deviation of ± 2mm), and the weight of the dagger is 70g (with a maximum deviation of ± 2mm).

1.3 Product parameters. The dagger handle is made of TPR material, with protective and anti slip treatment on the top and bottom; The dagger blade is made of TPU material with strong toughness and aging resistance, and features a double-edged blood tank design; The dagger sheath material adopts environmentally friendly soft TPR; Equipped with anti stripping straps, it is sturdy and not easy to fall off.

★ 1.4 Technical indicators. Dagger sheath has a Shore hardness of 25-30 °; Dagger blade Shore hardness 20-25 °; The Shaw hardness of the dagger handle is 60-65 °.

2. Environmental adaptability: It is required to be able to use normally in an environment between -30 ℃ and+50 ℃.

3. Reliability requirements: The product is highly simulated, the material is environmentally friendly, the knife blade is moderately soft and hard, can bend, and can directly pierce the human body without causing harm.

Hot Tags: simulated rubber equipment, China simulated rubber equipment manufacturers, simulator materials for fluid dynamics simulation, simulator materials for low fidelity simulation, simulator materials for power system simulation, simulator materials for customer service simulation, simulator materials for structural analysis simulation, simulator materials in augmented reality